Vol. 6 No. 3 (2025) Articles
Open Access

Sistem Monitoring dan Kontrol Kadar Air pada Tempat Penyimpanan Tembakau Menggunakan Wemos D1 Berbasis Smartphone

Aqilla Bayu Fatahilla
Universitas Yudharta
Rahmad Zainul Abidin
Universitas Yudharta
Published: September 10, 2025 Pages: 1893-1904
Original Full-Text Article
Download published version for reading and archiving
Abstract

Moisture content is a critical factor that determines the quality of tobacco. Inappropriate moisture levels, whether too high or too low, can degrade quality and trigger damage during storage. Previous studies have mostly focused on soil moisture monitoring or other agricultural products, while research on integrated monitoring and automatic control systems for tobacco moisture content in small-scale storage is still limited. This study aims to design an Internet of Things (IoT)-based system for monitoring and controlling tobacco moisture content using a Wemos D1 microcontroller, soil moisture sensor, Firebase, and an Android application developed with MIT App Inventor. The system monitors moisture levels in real time, sends automatic notifications to a smartphone, and controls a storage roof mechanism that opens when the moisture exceeds 14% and closes when it falls below 10%, in accordance with the Indonesian National Standard (SNI). The system was tested on a small scale under several scenarios, including measurements of dry and wet tobacco, notification delay testing, and internet connection range testing. Experimental results show that the system can detect tobacco moisture content with satisfactory accuracy, with an average notification delay of about 2.8–3 seconds. The roof control mechanism driven by a servo motor successfully operated in 100% of trials. The system also worked effectively within a Wi-Fi connection range of up to 20 meters without obstacles and 15 meters with obstacles. In conclusion, this study demonstrates that an IoT-based solution using Wemos D1 provides a practical approach to maintaining tobacco moisture content within the required quality standards for small-scale storage. Future work may include employing more precise capacitive sensors, integrating historical data storage, and applying predictive models to enhance the reliability of automated tobacco storage systems.

Article Metrics & Downloads Graph
Monthly Download Trends:
Author Biographies
Aqilla Bayu Fatahilla Universitas Yudharta

Program Studi Teknik Informatika, Teknik, Universitas Yudharta, Sengonagung, Kota Pasuruan, Provinsi Jawa Timur, Indonesia.

Rahmad Zainul Abidin Universitas Yudharta

Program Studi Teknik Informatika, Teknik, Universitas Yudharta, Sengonagung, Kota Pasuruan, Provinsi Jawa Timur, Indonesia.

How to Cite
Fatahilla, A. B., & Abidin, R. Z. (2025). Sistem Monitoring dan Kontrol Kadar Air pada Tempat Penyimpanan Tembakau Menggunakan Wemos D1 Berbasis Smartphone. Jurnal Indonesia : Manajemen Informatika Dan Komunikasi, 6(3), 1893-1904. https://doi.org/10.63447/jimik.v6i3.1575
License

Creative Commons Attribution 4.0 International License (CC BY 4.0)

This is an open-access article distributed under the terms of the Creative Commons Attribution 4.0 International License .

  • Share: You are free to copy, distribute, and transmit the work in any medium or format.
  • Adapt: You are free to remix, transform, and build upon the work for any purpose, even commercially.
  • Attribution: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Copyright & Retention: Authors retain copyright without restrictions and grant this journal the right of first publication under an open-access model. The journal retains non-exclusive publishing rights for archiving, indexing, and scholarly dissemination.

References
Total: 24 References
  1. Almujaddidy, U. A., Supriono, S., & Natsir, A. (2024). Rancang Bangun Protype Pengering Tembakau Berbasis Iot Untuk Meningkatkan Kualitas Tembakau Dan Menghemat Waktu Pengeringan. Innovative: Journal Of Social Science Research, 4(4), 11853-11864.
  2. Faqih, M. (2020). Efektivitas penggunaan media pembelajaran mobile learning berbasis android dalam pembelajaran puisi. Jurnal Konfiks, 7(2), 27-34.
  3. Haidar, L. (2023). Rancang Bangun Alat Ukur Kelembapan Tanah Menggunakan Sensor Soil Moisture pada Dukuh Tambakroto. J. Ilm. Sist. Inf, 2(1), 70-78. https://doi.org/10.51903/juisi.v2i1.573.
  4. Hakiki, M. I., Darusalam, U., & Nathasia, N. D. (2020). Konfigurasi Arduino IDE Untuk Monitoring Pendeteksi Suhu dan Kelembapan Pada Ruang Data Center Menggunakan Sensor DHT11. METODE, 7, 8.
  5. Harahap, A. M., Musril, H. A., Supriadi, S., & Okra, R. (2023). Perancangan Media Pembelajaran Simulasi dan Komunikasi Digital Menggunakan Mit App Inventor di SMKS Kesehatan Paluta Husada. Indonesian Research Journal on Education, 3(1), 139-151. https://doi.org/10.31004/irje.v3i1.158.
  1. Hasibuan, M. I. Z., & Triase, T. (2022). Implementasi Sistem Database Nosql Secara Realtime Menggunakan Firebase Realtime Database Pada Aplikasi Ourticle. SIBATIK JOURNAL: Jurnal Ilmiah Bidang Sosial, Ekonomi, Budaya, Teknologi, dan Pendidikan, 2(1), 1-24.
  2. Khobariah, N. F., Hermawan, P. D. S., & Kusumadiarti, R. S. (2022). Sistem Monitoring Suhu dan Kelembapan Ruang Server Berbasis Wemos D1. JIPI (Jurnal Ilmiah Penelitian dan Pembelajaran Informatika), 7(1), 32-42. https://doi.org/10.29100/jipi.v7i1.2134.
  3. Kumari, S., Ali, N., Dagati, M., & Dong, Y. (2025). IoT-Enabled Soil Moisture and Conductivity Monitoring Under Controlled and Field Fertigation Systems. AgriEngineering, 7(7), 207.
  4. Lesmana, K. (2025). PROTOTIPE PENGGUNAAN MOTOR SERVO UNTUK DISPENSER OTOMATIS BERBASIS ARDUINO DAN SENSOR HC-SR04. Jurnal Informatika dan Teknik Elektro Terapan, 13(2). https://doi.org/10.23960/jitet.v13i2.6063.
  5. Martínez-Martínez, V., Baladrón, C., Gomez-Gil, J., Ruiz-Ruiz, G., Navas-Gracia, L. M., Aguiar, J. M., & Carro, B. (2012). Temperature and relative humidity estimation and prediction in the tobacco drying process using artificial neural networks. Sensors, 12(10), 14004-14021.
  6. Prasetyawan, P., Samsugi, S., & Prabowo, R. (2021). Internet of Thing Menggunakan Firebase dan Nodemcu untuk Helm Pintar. Jurnal ELTIKOM: Jurnal Teknik Elektro, Teknologi Informasi Dan Komputer, 5(1), 32-39. https://doi.org/10.31961/eltikom.v5i1.239.
  7. Prasetyawan, P., Samsugi, S., & Prabowo, R. (2021). Internet of Thing Menggunakan Firebase dan Nodemcu untuk Helm Pintar. Jurnal ELTIKOM: Jurnal Teknik Elektro, Teknologi Informasi Dan Komputer, 5(1), 32-39. https://doi.org/10.31961/eltikom.v5i1.239.
  8. Priamudi, R. (2022). Alat uji kadar air pada biji kopi berbasis mikrokontroller arduino uno r3. Jurnal Portal Data.
  9. Saputra, H. T., Amartha, M. R., & Wulandari, D. (2024). RANCANG BANGUN ALAT MONITORING SISTEM JEMURAN IKAN ASIN OTOMATIS DENGAN SENSOR HUJAN DAN RTC BERBASIS WEMOS DAN SMS. JSR: Jaringan Sistem Informasi Robotik, 8(1), 79-83.
  10. Sitorus, A., Novrinaldi, N., & Bulan, R. (2020). Non-invasive moisture content measurement system based on the ESP8266 microcontroller. Bulletin of Electrical Engineering and Informatics, 9(3), 924-932.
  11. Sulistiyono, E. F., & Yunanda, A. B. (2022, October). Rancang Bangun Atap Jemuran Otomatis Berbasis NodeMCU. In Senakama: Prosiding Seminar Nasional Karya Ilmiah Mahasiswa (Vol. 1, No. 1, pp. 625-633).
  12. Tan, P., Gebremariam, E. T., Rahman, M. S., Salman, H., & Xu, H. (2022). Design and implementation of soil moisture monitoring and irrigation system based on arm and iot. Procedia Computer Science, 208, 486-493. https://doi.org/10.1016/j.procs.2022.10.067.
  13. Tang, X., Liu, S., & Zang, C. (2022). Design of tobacco storage environment monitoring system based on Lora technology. In ITM Web of Conferences (Vol. 45, p. 01064). EDP Sciences. https://doi.org/10.1051/itmconf/20224501064.
  14. TIRTOSASTRO, S. (2004). Penerapan Standar Mutu Tembakau di Indonesia. Perspektif: Review Penelitian Tanaman Industri, 3(1), 24-34. https://doi.org/10.21082/p.v3n1.2004.24-34.
  15. Tirtosastro, S., & Musholaeni, W. (2017). Penanganan panen dan pasca panen tembakau di Kabupaten Bojonegoro. Buana Sains, 15(2), 155-164. https://doi.org/10.33366/bs.v15i2.374.
  16. Tukan, M. I. (2024). Monitoring tools using DHT11 sensor, soil moisture sensor and motion sensor. Journal of Frontier Research in Science and Engineering, 2(4), 38-48.
  17. Zainudin, A., Santoso, T., Wijayanti, A., Pratiarso, A., Sudarsono, A., Mahmudah, H., ... & Susanti, T. (2020). Pemanfaatan Alat Monitoring Kadar Air Pada Gabah untuk Peningkatkan Kualitas Panen. DIKEMAS (Jurnal Pengabdian Kepada Masyarakat), 4(2).
  18. Zhang, X., Feng, G., & Sun, X. (2024). Advanced technologies of soil moisture monitoring in precision agriculture: A Review. Journal of Agriculture and Food Research, 18, 101473.
  19. Zhu, Y. Y., Xiao, F., Fu, Q. P., Dai, L., Qu, Y. B., Zhang, H., ... & Yin, J. (2025). Research on the relative humidity changes of the controlled atmosphere environment for redried tobacco storage. Scientific Reports, 15(1), 26633.
Similar Articles

Articles sharing related keywords and machine learning classifications:

Pengembangan Sistem Monitoring Kualitas Air dan Kendali Pakan Otomatis untuk Budidaya Ikan Berbasis Internet of Things
Sistem Monitoring Kondisi Kelembapan dan pH Tanah Berbasis Internet of Things (IoT) untuk Tanaman Hias
Penerapan IoT dengan Algoritma Fuzzy dan Mikrokontroler ESP32 dalam Monitoring Penyiraman
Pengembangan Aplikasi Android untuk Monitoring Suhu dan Kelembaban berbasis Internet of Things
Sistem Pemantauan Suhu dan Kelembapan Kandang Ayam Berbasis IoT dengan Notifikasi Telegram Otomatis